Setting up

9

Setting up

All instructions and regulations in this instruction manual must be observed.

Special attention must be given to all safety regulations!

All setting-up work must only be done by personnel with the necessary train- ing. For all setting-up work the machine must be isolated from its power supply by turning off the on/off switch or removing the machine plug from the electric power socket!

9.01

Inserting the needle

1

 

2

1

Fig. 9 - 01

2

Fig. 9 - 01a

Switch the machine off!

Danger due to unintentional starting of the machine!

Only use needles from the system intended for the machine, see Chapter 3

SpeciÞcations.

PFAFF 1245

●Set needle bar at top position and loosen screw 1.

●Insert the needle as far as possible (the long needle-groove must be facing left).

●Tighten needle retaining screw 1.

PFAFF 1246

●Set needle bar at top position and loosen screws 1.

●Push needles 2 fully in (the long groove of the left needle must face to the right and that of the right needle to the left).

●Tighten screws 1 again.

25