Installation and commissioning
8.03 Commissioning
1
2
Fig. 8 - 09
●Check the machine, particularly its electrical wiring for any damage.
●Remove pin 1 of the oil reservoir 2 (Fig. 8 - 09). The pin serves only to protect the machine from damage during transport and must not be used when sewing.
●Clean the machine thoroughly and oil it (see chapter 10 Care and maintenance).
●Have skilled personnel check if the ma- chine can be operated with the available mains voltage.
Do not operate the machine if there is any discrepancy.
The machine may only be connected to an earthed socket!
8.04 Switching the machine on/off
●Switch the machine on (see Chapter 7.01, On/off switch).
24