Setting up

9.02 Winding the bobbin thread, regulating the winder tension

4

6

1

 

3

5

2

Fig. 9 -02

●Place an empty bobbin 1 on winder spindle 1.

●Thread up as shown in Fig. 9-02 and wind the thread a few ttimes clockwise around bobbin 1. Engage the bobbin winder by pressing spindle 2 and lever 3 simultaneously

The bobbin is wound during sewing.

●The tension of the thread wound onto bobbin 1 is set on knurled screw 4.

●The bobbin winder will stop when sufficient thread is wound onto bobbin 1.

If the thread is wound on unevenly:

●Loosen nut 5.

●Turn thread guide 6 as required.

●Tighten nut 5 again.

26