Sewing
5.02 Sewing with fixed programs
Fixed programs are stored under the program numbers 1 and 2.
The fixed programs are used for the quick and easy production of seams with different amounts of fullness. When sewing with fixed programs, 2 or 3 seam sections are sewn after each other. With the knee switch it is possible to move to the next section. The fixed programs are designed as cyclic running programs, i.e. at the end of the last seam section, the machine moves back to the first seam section. The fullness value can be selected for each seam section, the settings for needle and foot positions apply to all sections and can be altered at any time with the appropriate function.
The fullness values are designed for a basic stitch length of 2.5 mm. When sewing with shorter stitch lengths, the gathering intensity is increased, with longer stitch lengths it is reduced accordingly.
● Switch on the machine and select program number "1" or "2", see Chapter 4.01 Selecting the program number.
Explanation of the displays and functions
Program selection
This opens the menu for entering the program number, see Chapter 4.01 Selecting the program number.
Seam section
Shows the number of seam sections in the sewing program.
Input mode
Exit the sewing mode and select the input mode.
Fullness
Alters the fullness value, see Chapter 4.02 Inputting fullness.
Seam start
Opens the menu for entering the functions at the beginning of the seam, see Chapter 5.01.01 Entering the seam start and seam end functions in the manual sewing mode.
Seam end
Opens the menu for entering the functions at the end of the seam, see Chapter 5.01.01 Entering the seam start and seam end functions in the manual sewing mode.
21