Sewing

5.03 Programmed sewing

With the program numbers 3 - 49 it is possible to call up previously programmed seams. In programmed sewing all seam sections for pre-gathering a sleeve are set in one seam pro- gram. The information about the seam program, such as program number, number of programmed seam sections, programmed comments is displayed.

For better orientation a seam sketch is shown with the programmed seam sections. The seam start, seam end, the seam sections already sewn, the current seam section and the seam sections still to be sewn are illustrated by symbols and different types of lines with different thicknesses. For the current seam section the corresponding parameters for seam section number, fullness with fullness adjustment and the number of stitches (length of seam section) are displayed. To control the seam sequence, the current seam (left or right seam) and the automatic changeover from left to right seam can be switched over or switched on.

● Switch on the machine, select the desired program number from "3" to "49", see Chapter 4.01 Selecting the program number.

Explanation of the displays and functions

Program selection

This opens the menu for entering the program number, see Chapter 4.01 Selecting the program number.

Seam section right/left

Shows the number of seam sections in the seam program for the right/left sleeve seam.

Input mode

Exit the sewing mode and select the input mode.

Fullness

Shows the current fullness value.

Current seam section

Shows the current seam section.

23