Input
6.01.02 Seam program input with the "Creating/adjusting a program" functionen"
With this function the seam program is entered by entering or changing the appropriate values on the control panel. This type of seam program input is particularly suitable for adjusting existing seam programs.
●Switch on the machine.
● Call up the input mode.
● Call up the "creating/adjusting a program" function.
● Carry out the basic settings and conclude with the "Enter" function, see Chapter 6.01.01 Basic settings for seam program input.
● Alter the fullness, see Chapter 4.02 Inputting fullness.
● Alter the maximum speed for the current seam section.
● These functions are used to scroll through the current seam program.
The current seam section is displayed accordingly, in addition to all the other current values.
● Enter the seam start functions, see Chapter 6.01.04 Entering the functions at the beginning of the seam during seam programming.
● Enter the functions for the end of the seam section, see Chapter 6.01.05 Entering the end of the seam section when programming the seam.
● Select a seam type
It is only possible to select the right or left seam, if the seam type "right and left seam" was selected in the basic setting, see Chapter 6.01.01 Basic settings for seam program input.
29