Input
6.01 Seam program input
Seam programs can be created by entering parameters in the "Creating/adjusting a seam program" function, or by sewing a sample with the "Teach in" function.
Irrespective of which function is being used, first of all it is necessary to select the program number and the basic settings of the seam program, which is to be sewn.
6.01.01 Basic settings for seam program input
The basic settings in the "creating/adjusting a program" and the
●Switch on the machine.
● Call up the input mode.
● Call up the "Creating/adjusting a seam program" or the "Teach in" function.
● If necessary, change the selected program number and confirm the selection.
● If applicable, enter or change a comment.
27