Input
6.01.03 Seam program input with the "Creating/adjusting a program" function
With this function the seam program is entered by sewing a sample. A new program is always created, i.e. if an existing program is selected, this will be overwritten.
●Switch on the machine.
● Call up the input mode.
● Call up the
● Carry out the basic settings and conclude with the "Enter" function, see Chapter 6.01.01 Basic settings for seam program input.
Before sewing starts the following displays and functions appear on the screen.
● Enter the seam start functions, see Chapter 6.01.04 Entering the functions at the beginning of the seam during seam programming.
● Enter the fullness, see Chapter 4.02 Inputting fullness.
● Enter the maximum speed for the current seam section.
●Sew the first seam section using the pedal function.
The number of stitches in the current seam section is counted and shown on the display. After sewing starts, the following displays and functions are shown on the screen.
31