Adjustment

1.06.02 Position of the thread catcher holder

Requirement

1.There should be a minimum amount of play between toothed wheel 3 and toothed segment 4.

2.Both in the neutral position and the foremost position of the catcher, the distance bet- ween the toothed segment 4 and the outer edge of the thread catcher holder 1 should be the same (see arrow).

1

4

Fig. 1 - 39

1

4

3

129-015

1

2

2

4

●Adjust the thread catcher holder 1 (screws 2) according to the requirements.

If requirement 2 cannot be fulfilled, loosen screw 2 and move the toothed segment 4 by one tooth.

48