Adjustment
1.06.03 Position of the thread catcher
Requirement
1.The bottom edge of the thread catcher 1 should be at a distance of 0.1 mm from the positioning finger of the bobbin case 5.
2.When the thread trimmer is in its resting position, the front edge of thread catcher 1 should be flush with the edge of knife 6.
6
1
0,1 mm
5
1
5
3
Fig. 1 - 40
1
4 
2
129-019
●Move thread catcher 1 (screws 2, two screws) in accordance with requirement 1.
●Turn thread catcher 1 (screw 3) in accordance with requirement 2.
Thread catcher 1 must be parallel to the surface of the thread catcher holder 4.
49