Cutting the Top and Bottom Rails
NOTE: Top Rail 2 is clearly labeled with CUT and NO CUT zones.
2
DO NOT
cut this end.
Cut this end
Door opening
1.Remove the End Caps from both sides of the Top Rail 2 .
2.Using the "Length to be Cut" dimension for Top Rail 2 calculated on Page 10, carefully measure and mark the rail on all sides to ensure an even cut.
3.Cut straight through Top Rail 2 .
Cutting the Bottom Rail
NOTE: Low and High Bottom Rails 3 and 4 are clearly labeled with CUT and NO CUT zones.
1.Select the Bottom Rail chosen on Page 9.
2.Using the same "Length to be Cut"
dimension for Top Rail 2 , carefully | 3 | |
measure and mark the Bottom Rail | Cut this portion | |
on all sides to ensure an even cut. | ||
| ||
3. Cut straight through Bottom Rail 3 or 4 . | OR | |
| ||
NOTE: After cutting any part of the screen, | 4 | |
use a file to remove any burrs from the |
| |
surfaces. | Cut this portion | |
|
11
