![Measuring the Door Opening](/images/new-backgrounds/54474/5447411x1.webp)
Measuring the Door Opening
The Viewpoint Screen requires a minimum Mounting Surface of 1 3/4" (45 mm). This mounting surface must be flat and flush, and at a right angle (90º) to the door.
For the Width - Measure the width of the opening between the right and left surfaces of the door frame, record this dimension in the box below labeled “W”.
For the Height – Measure the height of the opening between the underside of the top of the door frame (or filler strip), and the top of the door sill at a point 1 3/4" (45 mm) from the front surface of the frame. Record this dimension in the box below labeled “H”.
W=
H=
NOTE: If the height of the door opening is | A |
greater than the maximum height requirement, |
|
it is still possible to install the Viewpoint |
|
Screen. Simply attach a filler strip under the |
|
top of door frame to reduce the height of the |
|
opening to at least 80 9/16" (2,047 mm). Be |
|
sure to attach the filler strip before taking the |
|
| |
height measurement. |
|
|
|
W |
H |
1 3/4” |
(45 mm) |
mounting |
surface |
Door Sill
6