Cutting the Horizontal and
Cutting the Horizontal Parts
Vertical Parts
Calculate the correct cut off Lengths.
Maximum Opening | Subtract inside door | Enter Cut off Length | ||
Width | frame width “W” |
| Below | |
|
|
|
|
|
36” (914 mm) | - |
| = |
|
|
|
|
|
|
Cut from each part the cut off length provided by the calculation performed above.
Top Rail
Bottom Rail
After cutting any part of the Viewpoint Screen, use a file to remove any burrs from the surfaces.
Cut O Length
Cut O Length
Cutting the Vertical Parts
Calculate the correct cut off Lengths.
NOTE: Cutting of the Screen Housing Assembly must take place from the bottom of the unit, note the “Cut” / “No Cut” labels. No more than 4” (100 mm) can be cut from the Screen Housing Assembly.
Maximum Opening | Subtract inside door | Enter Cut off Length | ||
Height | frame height “H” |
| Below | |
|
|
|
|
|
80 9/16” (2,047 mm) | - |
| = |
|
|
|
|
|
|
Cut from each part the cut off length provided by the calculation performed above.
Do NOT remove the tape that keeps the components of the Screen Housing Assembly secure until all cutting is complete.
Catch Frame
Screen Housing Assembly
Cut o Length
Cut o Length
