Phase One 645 AF manual Flash compensation settings, Viewfinder LCD readouts

CF	X
	M

	Tv
	Av
	P
A	SET
	AEL

CF	X
	M

Tv

Av

P

SET

AEL

3.9flash compensation settings

By combined use of a Metz flash and the SCA3952 adapter, the camera adjusts for flash. It can be adjusted within ±3EV in increments of 1/3 steps.

1. Turn on the power

Install the SCA3952 adapter on the Metz flash, and put it on the camera then lock the flash in place using the locking knob on the flash shoe. Turn the shutter release mode selector lever to the “S” or “C” position, and turn ON the flash power switch.

2.When the flash charge confirmation lamp lights, press the set button A in. Theis displayed on the main LCD panel.

3.Turn the front or rear dial to select the flash compensation value. External LCD Panel (normal display)

4. When the shutter button is half-pressed, the	display appears on
the external LCD, and appears on the LCD	inside the viewfinder

with a + compensation, or	appears with a – compensation.
Viewfinder LCD readouts

-If the flash-charge mark is not displayed, the flash compensation button [A] can not be used.

-Keep pressing the set button to activate the flash compensation mode. You can check the exposure compensation value.

-If you turn the shutter release mode selector lever to the “L” (power OFF) position, the compensation value will be canceled.

Exposure compensation and flash compensation can be linked. Custom settings C-25.

42