| Phase Technology CI-6.0 IX QM

T E C H N O L O G Y

Install instructions for CI round flush mount models:

Thank you for purchasing Phase Technology Custom Installation speakers. Before installing, please read through this installation manual thoroughly.

Speaker/baffle assembly

Grille

Speaker installation tool

Universal flange & grille assembly (CI-FGR QM) (purchase separately)

Flange clamp screw (4x)

Flange clamp (4x)

The CI-FGR QM will clamp material up to 1 1/2” thick.

Baffle clamp screw (4x)

When deciding upon a location, consider the following:

•Make certain your speaker wires can be run to or are accessible from these locations.

•Make certain the wall or ceiling material is sturdy enough to support the weight and vibration of the speakers.

•It is recommended that our pre-construction rough-in brackets (part number

RB-17*) be used whenever possible in new construction. A back box (part number BB-12) is also available.

•Make certain the area behind the speaker is free of obstacles such as wall studs, electrical wiring, pipes, etc.

•Each speaker should be positioned properly, relative to the listening area for good coverage.

•Audio performance and room-to-room isolation will be improved if there is some fiberglass insulation placed loosely behind the speaker.

*The RB-17 rough-in bracket is available for installations in new construction.

218-1240

8650 College Boulevard Overland Park, KS 66210 (888)phase tk www.phasetech.com www.mseaudio.com