Phase Technology HV101, HV81, HV121 Subwoofer Connections, Amplier Panel, Left Front, Right Front

SUBWOOFER CONNECTIONS

Option 1: Low Level Setup This is the recommended method for those amplifiers and receivers that are equipped with a “Subwoofer Out” or “Pre-Amp Out” connection. Virtually all audio/video receivers have this connection clearly marked on the rear panel. Run a dedicated interconnect cable with RCA connectors from the subwoofer output jack to the line input on the subwoofer. In this setup, you will be using the internal crossover on your processor.

SUB OUT

Left Right Center Left Right

Front Front Channel Surr. Surr.

Ampli￿er Panel

Subwoofer

Line Input

Option 2: High Level Input Setup If your amplifier or receiver does not have a dedicated subwoofer output, it will be necessary to connect your new subwoofer directly to the speaker output terminals on the back of the unit. In this scenario, you will be running high quality speaker wires from the left and right front outputs of your amplifier to the high level inputs on the subwoofer. You will then need a second set of wires to carry the signal from the subwoofer back to the main speakers.

Left

Front

Center Speaker

Ampli￿er Panel

SUB OUT

Left Right Center Left Right

Front Front Channel Surr. Surr.

Right Front

Subwoofer

	To Speaker			From Receiver
Right		Left	Right Input		Left Input