Phase Technology HV81, HV101, HV121 Amplifier Setup And Bass Management, Warranty, Specifications

AMPLIFIER SETUP AND BASS MANAGEMENT

Many home theater receivers/processors have a feature that controls how the bass is processed and delivered to the subwoofer. It also adjusts the amount of bass that is sent to your satellite speakers. Look carefully in your amplifier or receiver’s instruction manual for details on how to adjust for the speaker size (sometimes called “Speaker Setup”) for your system.

When using a Dolby® Digital or DTS™-capable receiver/processor with the subwoofer connected to the subwoofer out on your amplifier turn the “LOW-PASS FREQUENCY” control to the highest setting (200 Hz) on the back of your subwoofer. Set the subwoofer crossover setting in the speaker setup section of the amplifier setup menu to 150 HZ (or the next highest setting) and set the Satellites and Center channels to “small”.

If you are NOT using the receiver’s internal processor for subwoofer control then turn the “CROSSOVER FREQUENCY” control on the subwoofer to the 3 o’clock (150 Hz) setting.

WARRANTY

LIMITED WARRANTY

Phase Technology warrants its loudspeakers to be free from defects in material and workmanship for a period of ten (10) years for speaker product and three (3) years for the electronic components to the original purchaser. Purchase must be made from an authorized Phase Technology dealer.

This warranty does not cover service or parts to repair damage caused by misuse, abuse, damage while in transit, alterations, unauthorized repairs, failure to follow instructions, fire, flood or any other cause beyond the reasonable control of Phase Technology. Defects in speaker cabinets or grilles must be brought to the attention of your dealer immediately after purchase. This warranty will be void if the products’ serial number has been altered or removed.

To obtain warranty service, defective product must be shipped in its original carton or equivalent together with original invoice or bill of sale, insured and prepaid to your authorized Phase Technology dealer or the factory when warranty service is requested.

If you choose to return the defective product to the factory you must first call us at (888) phase-tk to obtain a Return Authorization number prior to shipping. Product repaired under this warranty will be returned to you freight collect.

SPECIFICATIONS	HV81	HV101	HV121
Woofer	8” treated paper cone	10” treated paper cone	12” treated paper cone
Amp Power	100	100	100
(Watts, continuous)
Amp Power	200	200	200
(Watts, peak)
Frequency Response	35-200 Hz	29-200 Hz	25-200 Hz
Dimensions*	10.75” W x 14.125” H x 14.75” D*	11.75” W x 17” H x 16” D*	14” W x 19.5” H x 18.25” D*
Finish	Black Woodgrain Finish	Black Woodgrain Finish	Black Woodgrain Finish
			*Add 1” to depth for connection.
	Phase Technology Corporation www.phasetech.com
MSE Audio Group	8650 College Boulevard Overland Park, Kansas 66210		(866) 663-9770 www.mseaudio.com