Problem | Possible Cause | Remedy | |
|
|
| |
No picture | Is the power Cord Connected? | Connect power cord. | |
Is the power switch on? | Turn on power switch. | ||
| |||
| Is the signal cable properly | Connect signal cable properly. | |
| connected? | Check connector for bent pins. | |
| Is the monitor in the power | Press any key on the keyboard | |
| save mode? | or move the mouse. | |
|
|
| |
| Is the signal cable properly | Connect signal cable properly. | |
Picture is unstable | connected? | Check for bent or missing pins. | |
| Is the scanning frequency | Reconfigure the graphics board. | |
| outside the acceptable range? | within the range of the monitor. | |
| Are the pin arrangements of | Use correct signal cable. | |
| the signal connector correct? |
| |
|
|
| |
The color of image on | Is there magnetic object nearby? | Move the object away. | |
screen is abnormal. | Are the pin arrangements of the | Use correct signal cable. | |
| |||
| signal connector correct? |
| |
|
|
|
*Due to continuous product improvement, the specifications in this manual are subject to change without notice.
Your International Guarantee
Dear Customer,
9
