6) To adjust the horizontal convergence, press the or button.
7) When the horizontal convergence is adjusted, press the button to highlight VERTICAL
CONVERGENCE.
8) To adjust the vertical convergence, press the or button.
9) When the vertical convergence is adjusted, press the button to return to the EXTRA CONTROLS
window. BACK TO MAIN CONTROLS is highlighted.
Smart
Help
After returning to EXTRA CONTROLS . . .
. . . to continue to ADJUST PURITY, press the button until ADJUST PURITY is
highlighted. Next, start with step 4 under EXTRA CONTROLS - ADJUST PURITY.
Note: If you have not degaussed the monitor, please follow the steps under the Extra
Controls - Degauss section of this manual before adjusting the purity.
. . . to exit completely, press the button twice.
109P The OSD Controls
file:///G|/manual/english/109P/osd/osd_cont.htm (26 of 32) [10/16/1999 6:32:49 AM]