Philips 14PT3685/05 Installing your television set

Place your TV on a solid,stable surface,leaving a space of at least 5

cm around the appliance.

To avoid accidents,do not put anything on the set such as a cloth

or cover,a container full of liquid (vase) or a heat source (lamp).

The set must not be exposed to water.

The television set is equipped with 2 internal aerials;one for

receiving TV channels,and the other for receiving FM radio

stations.

• I n s e rt the TV aerial plug into theMs o c ket at the rear of the set.

• Insert the radio aerial plug into the FM ANT socket.

With the internal aerials,the reception may be poor under certain

conditions.You can improve it by repositioning the aerial.If the

reception remains unsatisfactory,an external aerial should be used.

Insert the mains plug into the wall socket

(220-240 V / 50 Hz).

Insert the two R6-type batteries (supplied) making sure that they

are the right way round.

The batteries supplied with this appliance do not contain mercury or nicke l

c a d m i u m . Please do not discard your used batteries if you have access to

a recycling facility (if in doubt,consult your dealer).When the batteries are

r e p l a c e d ,use the same type.

To switch on the set,press the on/off key.

A red indicator comes on and the screen lights up.Go straight to

the chapter Quick installation on the following page.

If the television remains in standby mode,press P on the

remote control.

The hands of the clock move through 360° when the set is

switched on for the first time.

The indicator flashes when you use the remote control.

Installing your television set