7
Tuning in to FM radio stationsAutomatic tuning
æPress jon the remote control to change to radio mode.The screen
goes blank.
ÂPress to bring up the main menu.
The menu appears with the INSTALLATIONoption highlighted.
êPress .The INSTALLATIONmenu appears with the AUTOSTORE option
highlighted.
®Press .The search begins.The operation takes a few minu t e s .The display
demonstrates the progession of the search and the number of FMs t a t i o n s
fo u n d .When it has finished,the I N S TA L L AT I O N m e nu re ap p e a r s
a u t o m a t i c a l ly.
If no stations are found,refer to the Tips chapter on p.16.
†You can now,if you wish,store and number your stations as required:see
the following chapter.
ÚTo exit the menus,press .
æEnsure that the set is in radio mode (j).
ÂPress .The list of radio stations appears with their frequencies.
You can also access this list via the SORTmenu in the INSTALLATION menu.
êUse or to select the radio station you wish to renumber.
Example:to renumber station 6 as 1: press .
To access other radio stations,select <> (using ) and press to display the
following pages or for the previous pages.
®Press to confirm. The line is displayed in white.
†Select the radio station you wish to change with.
In our example,press .
ÚPress to confirm.The line is displayed in white.
ºPress OK to confirm.Radio station No.6 is re nu m b e red as 1
(and No.1 as 6).
îRepeat steps êto ºas many times as there are stations to renumber.
œTo exit the menus,press .