Philips 14PV225/39, 14PV422/39, 14PV125/39 operating instructions Programming a recording Timer

7. Programming a recording (TIMER)

General information

Use a TIMER programming to automatically start and stop a recording at a later time or date. The TV-Video Combi will switch to the right pro- gramme number and begin recording at the cor- rect time. With this TV-Video Combi, you can pre-programme up to eight recordings within a period of one year. To make a programmed recording, your TV-Video Combi needs to know: *the date you want to make the recording

*the programme number of the TV channel *the start and stop time of the recording *VPS or PDC on or off [14PV225]

This information is saved in a TIMER block.

[14PV225]

What is 'VPS/PDC'?

'VPS' (Video Programming System)/ 'PDC' (Programme Delivery Control) are used to con- trol the start and duration of TV channel record- ings. If a TV programme starts earlier or ends later than scheduled, the TV-Video Combi will turn on and off at the correct time.

What do I need to know about 'VPS/PDC'? Usually the VPS or PDC time is the same as the start time. But if your TV guide shows a VPS or PDC time which is different from the programme’s scheduled start time, e.g. 20.10 (VPS/PDC 20.14), you must enter the VPS/PDC time exact to the minute. If you want a start time different from the VPS/PDC time, you must switch VPS/PDC off.

Programming a recording

1.Press MENU . The main menu will appear.

PLAY B-K	STOP C-L	. Then
2.Select 'TIMER' with

press FWD 1- B .

3.Select ONCE, DAILY, or WEEKLY recording with PLAY B-K STOP C-L . Then press

FWD 1- B .

SELECT K L CHOOSE B

→ONCE

DAILY WEEKLY TIMER LIST

END=EXIT

If all TIMER blocks are in use, 'FULL' will appear on the TV screen.

4.Select the desired TIMER block with 0..9 .

Selecting once/daily/weekly recordings Use PLAY B-K STOP C-Lto select from the fol- lowing options:

'ONCE': Recording once

'DAILY': Repeated daily recordings from Monday to Friday

'WEEKLY': Repeated weekly recordings (every week on the same day)

5.Enter the Start time (START) End time (STOP), Programme number (PROG.), VPS/PDC information and the Date with 0..9 .

Programming a recording from the external sources

You can also programme recording from an external source via the Scart socket AV1 or the front A/V connectors AV2.

6.When all inputs are correct, press

STATUS/EXIT . The programming information is stored in a TIMER block.

7.Insert a cassette with an intact security tab (unprotected).

EN 12