Specifications
Voltage:
Power consumption (Standby): less than 5W
Rewind time: less than 260 seconds (cassette
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette
Weight without packing in kg: 11.5
Dimensions in cm (HxWxD):40.0x37.3x38.0
Power consumption : 52W
Supplied accessories
•Operating instructions
•Remote control and batteries
1. Connecting the TV-Video Combi
Preparing the remote control for operation
The remote control and its batteries are packed separately in the original
1.Take the remote control and the enclosed bat- teries (2 batteries).
2.Open the remote control's battery compart- ment and place the batteries in it as shown in the picture and close the battery compartment.
The remote control is now ready to use. Its range is approximately 7 metres.
Connecting the cable
1.Insert the aerial cable plug into the AERIAL at the back of the
2.Connect the mains cable to the wall socket.
3.If the little red standby light (STANDBY 
) at the front panel of the set is not lit, please switch on the set using the main power switch. The power switch 
is located on the left side panel of the set.
4.Language setting picture will appear on the screen.
SELECTIONNER K L
→FRANÇAIS DEUTSCH NEDERLANDS
APP. MENU POUR CONTINUER
I do not see a Language setting picture * Check the cable connections.
You can find more details in chapter 'Preparation for use'.
Connecting additional devices
You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the EXT1 socket.
The respective scart socket is usually marked 'AV'or 'TV'on the decoder or satellite receiver.
EN | 4 |
|
