10Press 8k and then 8ENTER to display the setup results in detail.
AUTO
.RESULT
SP : 3/4/0.1
DIST: 14.0/17.0ft
LVL :
>SET CANCEL
[
]/[
]:Up/Down [ENTER]:Detail
RESULT WIRING
FRONT L;;;;;;;OK
[[]/[[]:Select [ENTER]:Return
11Press 8l / h repeatedly to toggle between the setup result displays.
Press 8k/ nto toggle between the parameters in a results.
Results of the speaker connection and wiring (WIRING)
Optimizing the speaker setting for your listening room (YPAO)
Notes
•The distances displayed in the “DISTANCE” results may be longer than the actual distance depending on the characteristics of your subwoofer.
•In the “EQ” results, different values may be set for the same frequency to provide finer adjustments.
12Press 8ENTER to return to the top result display.
AUTO
RESULT
SP : 3/4/0.1
DIST: 14.0/17.0ft
LVL :
.>SET CANCEL
[
]/[
]:Up/Down [ENTER]:Enter
13Make sure the pointer is pointing at “SET” and “CANCEL” and then press 8l / h to select “SET” or “CANCEL”.
AUTO
RESULT
SP : 3/4/0.1
DIST: 14.0/17.0ft
LVL :
.>SET CANCEL
[
]/[
]:Up/Down [ENTER]:Enter
PREPARATION
Results of the speaker distance from the listening position (DISTANCE)
Results of the setting of each speaker size
(SIZE)
Results of the parametric equalizer of each speaker (EQ)
Results of the speaker output level (LEVEL)
y
If you are not satisfied with the results or want to manually adjust each parameter, use “MANUAL SETUP” (see page 82).
Choices: SET, CANCEL
•Select “SET” to confirm the “AUTO SETUP” results.
•Select “CANCEL” to cancel the “AUTO SETUP” results.
14Press 8ENTER to confirm your selection.
The following screen appears. Disconnect the optimizer microphone from this unit. The optimizer microphone is sensitive to heat. Keep it away from direct sunlight and do not place it on top of this unit.
AUTO
AUTO
Disconnect Microphone
PRESS [ENTER] [MENU]:Exit
English
