
Customizing this unit (MANUAL SETUP)
■Speaker distance C)SP DISTANCE
Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. Ideally, each speaker should be the same distance from the main listening position. However, this is not possible in most home situations. Thus, a certain amount of delay must be applied to the sound from each speaker so that all sounds will arrive at the listening position at the same time.
| C)SP DISTANCE | 1/2 |
| C)SP DISTANCE | 2/2 |
| ||||
| . UNIT;;;;;;;;feet | . SBL;;;;;;;;8.0ft | ||||||||
| FRONT L;;;10.0ft | |||||||||
| FRONT R;;;10.0ft | SBR;;;;;;;;8.0ft | ||||||||
| CENTER;;;;;8.5ft | SWFR;;;;;;;10.0ft | ||||||||
| SUR. L;;;;;8.0ft | PRNS L;;;;;10.0ft | ||||||||
| SUR. R;;;;;8.0ft | PRNS R;;;;;10.0ft | ||||||||
[[ | p | Up/Down | [[ | p | Up/Down | |||||
| [p]/[[]: Select |
|
| [p]/[[]: Adjust |
|
| ||||
Unit for the speaker distance adjustment | UNIT |
Initial setting:
[U.S.A. and Canada models]: feet (ft)
[Other models]: meters (m)
ChoiceFunctions
meters (m) Adjusts speaker distances in meters.
feet (ft) | Adjusts speaker distances in feet. |
|
|
Speaker distances
Control range: 0.30 to 24.00 m (1.0 to 80.0 ft)
Control step: 0.10 m (0.5 ft) Initial setting:
FRONT L/FRONT R/SWFR/PRNS L/PRNS R: 3.00 m (10.0 ft)
CENTER: 2.60 m (8.5 ft)
SUR. L/SUR. R/SBL/SBR: 2.40 m (8.0 ft)
SP DISTANCE | Adjusted speaker |
|
|
FRONT L | Front left speaker |
|
|
FRONT R | Front right speaker |
|
|
CENTER | Center speaker |
|
|
SUR. L | Surround left speaker |
|
|
SUR. R | Surround right speaker |
|
|
SBL | Surround back left speaker |
|
|
SBR | Surround back right speaker |
|
|
SWFR | Subwoofer |
|
|
PRNS L | Presence left speaker |
|
|
PRNS R | Presence right speaker |
|
|
Notes
•The available speaker channels differ depending on the setting of the speakers.
•Instead of “SBL” and “SBR”, “SUR.B” is displayed if “SUR.B L/R SP” is set to either “SMLx1” or “LRGx1” (see page 88).
■Test tone D)TEST TONE
Turns the test tone output on or off for the “SPEAKER SET”, “SP LEVEL”, and “SP DISTANCE” settings.
| D)TEST TONE |
|
| >OFF ON | |
| [p]/[[]: Select | |
| [ENTER]: Return | |
|
|
|
Choice | Functions | |
|
|
|
OFF | This unit does not output the test tone for the | |
| “SPEAKER SET”, “SP LEVEL”, and “SP | |
| DISTANCE” settings. | |
|
|
|
ON | This unit outputs the test tone for the | |
| “SPEAKER SET”, “SP LEVEL”, and “SP | |
| DISTANCE” settings. | |
|
|
|
y
If you use a handheld sound pressure level meter, hold at arm’s length and point upwards so that the meter is in the listening position. With the meter set to the 70 dB scale and to C SLOW, calibrate each speaker to 75 dB.
Note
This function is automatically turned off if you exit from “BASIC MENU”.