Using the sleep timer
Use this feature to automatically set the main zone to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to the AC OUTLETS (see page 28).
Note
Even if this unit is in the standby mode, this unit does not cut off the power to AC OUTLETS while charging connected iPod (see page 28).
Set the operation mode selector to FAMP and then press HSLEEP repeatedly to set the
amount of time.
Each time you press HSLEEP, the front panel display changes as shown below.
SLEEP 120min | SLEEP 90min |
SLEEP OFF SLEEP 30min | SLEEP 60min |
The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.
Flashes
SLEEP
Lights up
SLEEP
Playback
■Canceling the sleep timer
Press HSLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display.
Disappears
SLEEP OFF
The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.
y
The sleep timer setting can also be canceled by pressing
CSTANDBY (or KMAIN ZONE ON/OFF) to set the main
zone to the standby mode.
OPERATION | BASIC |
|
|
English
