Advanced setup
See page 109 for the operation of the advanced setup.
■SIRIUS Satellite Radio Parental Lock personal identification number reset
SR PIN
Use this feature to set the code number (personal identification number) for the SIRIUS Satellite Radio Parental Lock feature to the initial factory setting. This feature is useful when you forget or want to change the current code number.
Choices: RESET, CANCEL
•Select “RESET” to set the code number to the initial factory setting.
•Select “CANCEL” to set the code number to the initial factory setting.
Note
Even if you set “SR PIN” to “RESET”, this unit does not unlock the locked channels. The initial factory setting of the Parental Lock code number is “0000”.
■Bi-amplifier setting BI-AMP
Use this feature to activate or deactivate the
Choices: ON, OFF
•Select “ON” if you want to activate the
•Select “OFF” if you want to deactivate the
Note
When
■SCENE IR code setting SCENE IR
Use this feature to output the remote control signals at the REMOTE OUT jack automatically when this unit is in the SCENE mode.
Choices: ON, OFF
•Select “ON” when the component connected to the REMOTE OUT jack is the Yamaha component and has the capability of the SCENE control signals. This unit automatically sends the remote control signals to the component.
•Select “OFF” when the component connected to the REMOTE OUT jack is not the Yamaha component and does not have the capability of the SCENE control signals.
Note
If noises are output when you operate the SCENE function, set “SCENE IR” to “OFF”.
■Monitor check MON.CHK
Use this feature to activate or deactivate the monitor check function of this unit. When “MON. CHK” is set to “YES”, this unit receives the information of the available video signal resolutions from the video monitor connected via HDMI and you can only select the resolutions supported by the video monitor in “HDMI RES.” (see page 99). When “MON. CHK” is set to “SKIP”, you can select any resolution in “HDMI RES.”.
Choices: YES, SKIP
■Parameter initialization INIT
Use this feature to reset the parameters of this unit to the initial factory settings. You can select the category of parameters to be initialized.
Choices: DSP PARAM, VIDEO, ALL, CANCEL
•Select “DSP PARAM” to initialize all the parameters of the sound field programs (see page 74).
•Select “VIDEO” to initialize the parameters in “VIDEO SET” (see page 98) and “OSD SHIFT” in “DISPLAY SET” (see page 98).
•Select “ALL” to initialize all the parameters of this unit.
•Select “CANCEL” to cancel the initialization procedure.
Note
Use “INITIALIZE” in the sound field program menu to initialize the parameters of the desired program (see page 74).
