Yamaha HTR-6180 owner manual Selecting audio input jacks, 44 En

Playback

Before performing the following operations, set the operation mode selector on the remote control to FAMP.

Selecting audio input jacks

(AUDIO SELECT)

This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.

y

•We recommend that you set the audio input jack select to “AUTO” in most cases.

•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see

page 100).

Displaying the current status of this unit on a video monitor

You can display the operating information of this unit on a video monitor.

1Turn on the video monitor connected to this unit.

2Press JDISPLAY on the remote control.

The current status screen appears in the OSD.

STATUS

Press QAUDIO SELECT (or PAUDIO SEL)

repeatedly to select the desired audio input jack select setting.

Available input sources

MULTI CH VCR DVR V-AUX DTV/CBL DVD MD/CD-R CD TUNER PHONO XM SIRIUS

Currently selected audio input jack select setting

AUDIO SELECT		Function
AUTO	Automatically selects input signals in the
	following order:
	(1) HDMI
	(2)	Digital signals
	(3)	Analog signals
HDMI	Selects only HDMI signals. When HDMI
	signals are not input, no sound is output.
COAX/OPT	Automatically selects input signals in the
	following order:
	(1)	Digital signals input at the COAXIAL
	jack
	(2)	Digital signals input at the OPTICAL
	jack
	When no signals are input, no sound is
	output.
ANALOG	Selects only analog signals. If no analog
	signals are input, no sound is output.

Note

This feature is not available when no digital input jacks (OPTICAL, COAXIAL and HDMI) are assigned. In addition, HDMI is not available as an audio input jack select setting when the HDMI IN jacks are not used. Use “I/O ASSIGNMENT” in “INPUT MENU” to reassign the respective input jack (see page 95).

y

•You can select the amount of time that the current status is displayed in the OSD by using the “OSD-AMP” parameter in “OPTION MENU” (see page 98).

•To turn off the status screen, press JDISPLAY again.

Note

The OSD signal is not output at the DVR and VCR VIDEO OUT jacks and will not be recorded.

44 En