Advanced setup
See page 109 for the operation of the advanced setup.
■Remote control AMP ID REMOTE AMP
Use this feature to set the AMP ID of this unit for remote control recognition. This feature is useful when you operate this unit and the other Yamaha receivers/ amplifiers in the same room separately.
Choices: ID1, ID2
• Select “ID1” when the remote control AMP ID code is set to “00001”.
• Select “ID2” when the remote control AMP ID code is set to “00002”.
Setting remote control AMP ID codes
You need to set the remote control AMP ID code for the remote control.
1Press 2CODE SET using a ballpoint pen or a similar object.
The BTRANSMIT indicator on the remote control flashes twice.
TRANSMIT
CODE SET | TRANSMIT |
POWER POWER STANDBY POWER
TV AV
Flashes
2Press the numeric buttons (6) to enter the code number “00001” or “00002”.
The BTRANSMIT indicator on the remote control flashes twice, and the AMP ID code is changed.
PROG |
| ENHANCER | SUR. DECODE |
| |
1 |
| 2 | 3 | 4 |
|
STRAIGHT | PURE |
|
| PARAMETER | TRANSMIT |
|
|
|
|
| |
5 |
| 6 | 7 | 8 |
|
MULTI CH IN | AUDIO SEL |
|
| Flashes | |
9 |
| 0 |
|
| |
|
|
|
| ||
AMP ID |
| Remote | |
Function | control AMP | ||
code *1 | |||
| ID *2 | ||
|
| ||
|
|
| |
00001 | To operate this unit using | ID1 | |
(initial setting) | the default code. | (initial setting) | |
|
|
| |
00002 | To operate this unit using | ID2 | |
an alternative code. | |||
|
| ||
|
|
|
*1 The remote control setting
*2 The setting of this unit
■Remote control TUNER ID REMOTE TU
Use this feature to set the TUNER ID of this unit for remote control recognition.
Choices: ID1, ID2
• Select “ID1” when the remote control TUNER ID code is set to “82915”.
• Select “ID2” when the remote control TUNER ID code is set to “82178”.
Setting remote control TUNER ID codes
You need to set the remote control TUNER ID library code for the remote control.
1Press 4TUNER to select “TUNER” as the input source.
TUNER
2Press 2CODE SET using a ballpoint pen or a similar object.
The BTRANSMIT indicator on the remote control flashes twice.
TRANSMIT
CODE SET | TRANSMIT |
POWER POWER STANDBY POWER
TV AV
Flashes
3Press the numeric buttons (6) to enter the code number “82915” or “82178”.
The BTRANSMIT indicator on the remote control flashes twice, and the TUNER ID code is changed.
| PROG | ENHANCER | SUR. DECODE |
|
1 | 2 | 3 | 4 |
|
| PURE |
| PARAMETER | TRANSMIT |
|
|
|
| |
5 | 6 | 7 | 8 |
|
MULTI CH | AUDIO SEL |
|
| Flashes |
9 | 0 |
|
|
TUNER ID |
| Remote | |
Function | control | ||
code *1 | |||
| TUNER ID *2 | ||
|
| ||
|
|
| |
82915 | To operate this unit using | ID1 | |
(initial setting) | the default code. | (initial setting) | |
|
|
| |
82178 | To operate this unit using | ID2 | |
an alternative code. | |||
|
| ||
|
|
|
*1 The remote control setting
*2 The setting of this unit
