XM Satellite Radio tuning
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4XM.
Setting the XM Satellite Radio preset channels
You can use this feature to store up to 40 XM Satellite Radio channels (A1 to E8: 8 preset channel numbers in each of the 5 preset channel groups). You can then recall any preset channel easily by selecting the preset channel group and number as described in “Preset Search mode” on page 61.
1Search for a channel you want to set as a preset channel by using one of the XM Satellite Radio search modes.
See “Basic XM Satellite Radio operations” on page 60 for details.
043
Currently selected channel number
2Press FMEMORY (or 9MEMORY).
The MEMORY indicator flashes in the front panel display for approximately 30 seconds.
MEMORY
Flashes
Note
You must proceed to and carry out steps 3 through 4 while the MEMORY indicator is flashing in the front panel display.
3Press EPRESET/TUNING/CH l / h
(or 8PRESET/CH k/ n) repeatedly to select a preset channel group and number (A1 to E8) while the MEMORY indicator is flashing.
The preset channel number appears in the front panel display.
Flashes
MEMORY
C5 043
Selected preset channel group and number
y
You can select the preset station group (A to E) by pressing
DA/B/C/D/E (or
4Press FMEMORY (or 9MEMORY) to set the selected XM Satellite Radio channel as a preset channel while the MEMORY indicator is flashing.
A colon (:) appears next to the preset channel number for confirmation, and the MEMORY indicator turns off in the front panel display.
C5:043
Colon (:)
Note
Once you set a new preset channel, the one previously stored in the same preset channel group and number is cleared.
