
FM/AM tuning
y
•When this unit is tuned into a station, the TUNED indicator lights up.
•Hold down the button to continue searching when this unit is in the manual tuning mode.
•Press GINFO (or 0INFO) repeatedly to toggle the frequency information and sound field program information in the front panel.
•(U.S.A. model only)
If the station that this unit is tuned into is an HD Radio station, you can toggle the HD Radio information in the front panel display by pressing GINFO (or 0INFO) repeatedly. See page 58 for details.
•(U.S.A. model only)
If the station that you tune this unit into is the HD Radio station, the HD indicator also appears in the front panel display. See page 57 for details about the HD Radio features.
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4TUNER.
■Direct frequency tuning
Use this feature tune into the desired station directly by entering the frequency.
1Press 7BAND on the remote control repeatedly to select the desired reception band.
“FM” or “AM” appears in the front panel display.
2Press BSEARCH MODE (or ISRCH MODE) repeatedly to select “AUTO TUNING”
or “MANUAL TUNING”.
A
No colon (:)
y
If a colon (:) appears in the front panel display, manual tuning is not possible. Press BSEARCH MODE (or ISRCH MODE) to turn the colon (:) off.
3Enter the frequency of the desired station by pressing the numeric buttons (6).
Example: To tune into 103.7 MHz
1 | 0 | 3 | 7 |
y
If the entered frequency is out of the range of the FM/AM tuning, “WRONG STATION!” appears in the front panel display and then this unit automatically tunes into the last selected station.
Using station preset feature
Use this feature to store up to 40 stations FM/AM stations (A1 to E8: 8 preset station numbers in each of the 5 preset station groups). Preset the desired stations to this unit by using the automatic or manual preset tuning features in advance (see “Automatic station preset” and “Manual station preset” on page 55).
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4TUNER.
1Press BSEARCH MODE (or ISRCH MODE) repeatedly to select “PRESET
TUNING”.
2Press EPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) to select the desired preset station number (A1 to E8).
The preset station group and number appear in the front panel display along with the station band and frequency.
A1:FM 88.9MHz
Preset group and preset station number
y
You can select the preset station group (A to E) by pressing DA/ B/C/D/E (or
Note
•(U.S.A. model only)
When you recall one of the
•(U.S.A. model only)
If the selected