
Notes
•This unit does not convert 480 line video signals and 576 line video signals interchangeably.
•The analog component video signals with 480i (NTSC)/576i (PAL) of resolution are converted into the
•The converted video signals are only output at the MONITOR OUT jacks. When recording a video source, you must make the same type of video connections between each component.
•When composite video or
•Unconventional signals input at the composite video or
HDMI resolution HDMI RES.
Use this feature to activate or deactivate the HDMI up- scaling of the analog video signals input at the VIDEO, S VIDEO and COMPONENT VIDEO jacks so that the up- scaled video signals are output at the HDMI OUT jack. This unit
•480i (NTSC)/576i (PAL) → 480p/576p, 1080i, 720p, or 1080p
•480p/576p → 1080i, 720p, or 1080p
B)VIDEO SET |
|
HDMI RESOLUTION | |
>*THROUGH | * 480p |
* 720p | *1080i |
*1080p |
|
[p]/[[]: Select | |
[ENTER]: Enter |
Choice | Functions |
|
|
THROUGH | Does not |
|
|
480p (or 576p), | |
1080i, 720p, | 1080i, 720p, or 1080p of resolution. |
1080p |
|
|
|
Customizing this unit (MANUAL SETUP)
HDMI aspect ratio HDMI ASPECT
Use this feature to select the adjustment of aspect ratio for analog video signals output at the HDMI OUT jack.
B)VIDEO SET
VIDEO CONV.;;;;;;ON HDMI RES.;;;;*1080p
. HDMI ASPECT;;;THRGH
| [p]/[[]: Up/Down |
| [ENTER]: Select |
|
|
Choice | Functions |
|
|
THRGH | Does not make any adjustments to the aspect |
| ratio for the HDMI video signal sources. |
|
|
16:9 | Displays video images with the aspect ratio of |
| 4:3 on your video monitor with the aspect ratio |
| of 16:9. Black stripes appear on the right and left |
| sides as a result. |
|
|
SMART | Fits video images with the aspect ratio of 4:3 to |
| your video monitor with the aspect ratio of 16:9. |
|
|
Notes
•When “HDMI RES.” is set to “THROUGH”, you cannot make any adjustments to “HDMI ASPECT”.
•If the aspect ratio of the input video source is other than 4:3, this unit automatically ignores the setting of “HDMI ASPECT”.
•When “HDMI ASPECT” is set to “SMART”, the video images of the edge of the video monitor are rather stretched.
•When the video signals are input at HDMI IN jacks or the signals are input with 720p, 1080i or 1080p of resolution, the setting of “HDMI ASPECT” does not affect the video signals output at the HDMI OUT jack.
OPERATION | ADVANCED |
|
|
Notes
•This unit does not
•The “HDMI RES.” parameter appears only when you set “VIDEO CONV.” to “ON”.
•If you connect your video monitor via HDMI connection, this unit automatically detects the available video signal resolution of the video monitor, and an asterisk (*) appears on the left of the available video signal resolution(s).
•If this unit cannot detect the available video signal resolution(s) of the connected video monitor, set “MON. CHK” (see
page 112) to “SKIP” and then set “HDMI RES.” again.
•This unit does not convert between 480 line video signals and 576 line video signals.
English