FM/AM tuning
3Press EPRESET/TUNING/CH l / h (or
8PRESET/CH k / n) repeatedly to select a preset station group and number (A1 to E8) while the MEMORY indicator is flashing.
•Press Eh(or 8k) to select a higher preset station group and number.
•Press El(or 8n) to select a lower preset station group and number.
Flashes
MEMORY
A1:FM 88.9MHz
The displayed station has been stored as A1.
y
You can select the preset station group (A to E) by pressing
DA/B/C/D/E (or
4Press FMEMORY (or 9MEMORY) while the MEMORY indicator is flashing.
The station band and frequency appear in the front panel display with the preset station group and number you have selected. The MEMORY indicator disappears from the front panel display.
Notes
•Any stored station data existing under a preset station number is cleared when you store a new station under the same preset station number.
•The reception mode (stereo or monaural) is stored along with the station frequency.
■Exchanging preset stations
You can exchange the assignments of two preset stations with each other. The example below describes the procedure to exchange preset station “E1” with “A5”.
Before performing the following operations, set the operation mode selector on the remote control to FSOURCE and then press 4TUNER.
1Select preset station “E1” using DA/B/C/D/E and EPRESET/TUNING/CH l / h.
See “Using station preset feature” on page 54.
2Press and hold BEDIT for more than 3 seconds.
“E1” and the MEMORY indicator flash in the front panel display.
Flashes
MEMORY
E1:FM 88.9MHz
Flashes
3Select preset station “A5” using DA/B/C/D/E and EPRESET/TUNING/CH l / h.
“A5” and the MEMORY indicator flash in the front panel display.
See “Using station preset feature” on page 54.
Flashes
MEMORY
A5:FM 88.9MHz
Flashes
4Press BEDIT again.
“EXCHANGE
