The screen is too bright or too dark Adjust the contrast and brightness in OSD Main Controls. (The
backlight of the LCD monitor has a fixed life span. When the screen
becomes dark or begins to flicker, please contact your dealer.
●
An after-image appears If an image remains in the screen for an extended period of time, it
may be imprinted in the screen and leave an after-image. This
usually disappears after a few hours
●
An after-image remains after the power
has been turned off.
This is characteristic of liquid crystal and is not caused by a
malfunction or deterioration of the liquid crystal. The after-image will
disappear after a set amount of time
●
Green, red, blue, dark, and white dots
remains The remaining dots are normal characteristic of the liquid crystal
used in today’s technology.
●
For further assistance, refer to the Consumer Information Centers list to contact your local Philips distributor.
RETURN TO TOP OF THE PAGE
Troubleshooting
file:///D|/M/english/190b4cgbs/safety/saf_troub.htm (2 of 2) [5/14/2003 10:25:31 AM]