
Troubleshooting
Vertical flicker appears
● Press the Auto button.
● Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.
Horizontal flicker appears
The screen is too bright or too dark
An
An
Green, red, blue, dark, and white dots remains
Adjust blue "power on" light
●Press the Auto button.
●Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.
●Adjust the contrast and brightness on
●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an
●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The
●The remaining dots are normal characteristic of the liquid crystal used in today’s technology.
●Adjust blue "power on" light using the power LED of Setup in OSD Main Controls.
For further assistance, refer to the Consumer Information Centers list and contact Philips customer service representative.
RETURN TO TOP OF THE PAGE
file:///G/TEMP/PHILIPS/190S9 EDFU/lcd/manual/ENGLISH/190S9/safety/saf_troub.htm(第 2/3