Philips 19PFL3403D/10 user manual Setup devices, Use Philips EasyLink

7.4Setup devices

Assign a channel decoder

Decoders that decode digital channels can be connected to SCART.You have to assign the TV channel as a channel to be decoded.Then assign the connection where the decoder is connected.

1.Press MENU on the remote control and select Install > Decoder.

	PHILIPS
TV Menu	Smart settings
Smart settings	Personal
Picture	Vivid
Sound	Standard
Features	Movie
Install	Power saver

2.Press Æ to enter the list.

3.Press Î or ï to select the channel to decode.

4.Press OK to select or unselect the channel.

5.Press Í to return to the previous menu.

6.Press MENU to exit.

7.5 Use Philips EasyLink

Your TV suppports Philips EasyLink, which	EN
enables one-touch play and one-touch standby
between EasyLink-compliant devices. Compliant
devices must be connected to your TV via
HDMI and assigned as described in Section 7.4.1
Assign devices to connectors.

Enable or disable EasyLink

1.Press MENU on the remote control then select Install > Preferences > EasyLink.

2.Select On or Off.

Use one-touch play

One-touch play enables you to press the play button on, for example, your DVD remote control.This starts playback on your DVD device and automatically switches your TV to the correct source, displaying DVD content.

Use System standby

System standby enables you to press and hold the POWER button on, for example, your TV remote control.This switches your TV and all connected HDMI devices on or to standby mode.You can perform system standby using remote controls from any of the connected HDMI devices.

EN-35