Troubleshooting
•Safety and Troubleshooting •FAQs
•Common Problems
•Imaging Problems
Troubleshooting
This page deals with problems that can be corrected by a user. If the problem still persists after you have tried these solutions, contact Philips customer service representative.
•Regulatory Information •Other Related Information
Common Problems
Having this problem
No Picture (Power LED not lit)
No Picture
(Power LED is Blinking Blue LED Period:3sec on,3sec off)
Screen says
Check these items
●Make sure the power cord is plugged into the power outlet and into the back of the monitor.
●First, ensure that the power button on the front of the monitor is in the OFF position, then press it to the ON position.
●Make sure the computer is turned on.
●Make sure the signal cable is properly connected to your computer.
●Check to see if the monitor cable has bent pins.
●The Energy Saving feature may be activated
●Make sure the monitor cable is properly connected to your computer. (Also refer to the Quick
●Check to see if the monitor cable has bent pins.
●Make sure the computer is turned on.
| ● | The Auto Function is designed for use on standard Macintosh |
|
| or |
AUTO button not working properly | ● | It may not work properly if using nonstandard PC or video |
|
| card. |
