The Philips SmartLoader works in 2 modes – Wireless and Wired:

Wireless mode ---- through infrared sensor (15/20HF5234)

 

Switch the SmartLoader to “Wireless” mode by sliding the side-switch to the

icon on the SmartLoader

device. Point the Wireless SmartLoader to the TV’s infrared receiver (optimal distance of 5-30cm) and proceed with the Installation procedure listed below.

Wired mode ---- using the by-packed accessory cable(s) (20/26/32HF5335D)

 

Switch the SmartLoader to “Wired” mode by sliding the side-switch to the

 

 

icon on the SmartLoader

 

 

 

device.

 

Examine the rear connectors of the TV set to determine if the 3-pin or 4-pin female connector wire (packed with the Wireless SmartLoader) should be used. Plug in the correct connector wire to the corresponding opening on the TV set (usually marked as SERV C), and then connect the RJ11 jack end of the accessory wire to the RJ11 socket on the SmartLoader.

The Installation Procedure consists of three simple steps:

1. Choosing a Master TV

The Master TV is the TV set whose installation and configuration settings are to be copied into other TV’s (of the same type only).

2. Programming the SmartLoader with the settings from the Master TV

Follow these steps to program the SmartLoader with the settings of the Master TV.

a)Wireless method

Set the SmartLoader to “Wireless” mode using the side switch.

Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” Key on the SmartLoader.

b) Wired method

Connect the SmartLoader to the TV using the appropriate accessory cable. Set the SmartLoader to “Wired” mode using the side switch.

Turn on the TV, and while holding the SmartLoader, point it in the direction of the TV. Press the “MENU” Key on the SmartLoader.

The Master TV will show the following menu:

SMARTLOADER TO TV >

TV TO SMARTLOADER >

On the TV screen, highlight the menu option “TV TO SMARTLOADER”

Press the right arrow key on the SmartLoader to start the programming process

A number display (from 0~100) will be shown on screen, indicating the percentage of the programming progress from the TV to the SmartLoader. When the programming is completed, “##” will show “100” and the message “DONE” will appear.

TV TO SMARTLOADER ## (0-100)

The SmartLoader is programmed and can be used to install and configure other TVs.

Copying the settings of the Master TV to other TVs with the SmartLoader

Follow these steps to install and configure the settings of a Philips TV with the SmartLoader.

- 6 -

Page 38
Image 38
Philips 20/26/32HF5335D manual Installation Procedure consists of three simple steps

20/26/32HF5335D specifications

The Philips 20/26/32HF5335D series of displays is designed to meet the varied demands of professional environments, especially in hospitality and commercial settings. These displays are part of Philips' extensive range of high-quality screens, renowned for their reliability, performance, and user-friendly features.

One of the main attractions of the HF5335D series is its excellent picture quality. The displays feature a resolution of Full HD 1920x1080, offering stunning visuals that make them suitable for a variety of applications, from displaying promotional content in retail spaces to providing crystal-clear images in hospitality environments. The LED backlighting technology ensures bright, vivid colors and exceptional contrast ratios, enhancing the overall viewing experience.

Another key feature of the Philips HF5335D series is its SmartControl software, which provides easy access to a wide range of display settings. Users can adjust brightness, contrast, and color settings with ease, ensuring that content is always displayed in the best possible manner. This is particularly useful in environments where lighting conditions can vary significantly throughout the day.

The Philips HF5335D displays also come equipped with extensive connectivity options. With multiple HDMI, VGA, and USB ports, they can easily connect to a variety of devices, including computers, media players, and other peripherals. The USB playback function allows for easy access to multimedia files, enabling businesses to showcase their content without the need for additional equipment.

In terms of durability, the HF5335D series is built to last. The displays are designed for 24/7 operation, making them ideal for environments where continuous use is necessary. They are also equipped with a robust casing, ensuring they can withstand the rigors of daily use in busy commercial spaces.

Energy efficiency is another critical aspect of the Philips HF5335D displays. They are designed to consume less power compared to traditional displays, which not only helps reduce operational costs but also minimizes environmental impact. This focus on sustainability makes them an attractive option for businesses looking to improve their eco-friendliness.

Overall, the Philips 20/26/32HF5335D series combines impressive display quality, user-friendly features, and robust build, making it an excellent choice for commercial use across various industries.