FUNCTIONS OF REMOTE CONTROL
1. STANDBY
Switch off set temporarily to standby mode. (The red light indicator lights up when set is on standby mode). To switch on set, press STANDBY or any DIGIT button.
2. AV
Selects the AV channels.
3. OSD
–Displays channel number and sound transmission mode.
–Allows you to exit menu from screen.
4.DIGIT (0 - 9)
Allows you select a channel. For a
5.SMART SOUND
Allows you to access 4 different types of sound settings.
6.MENU
To display or exit menu from screen.
7.CURSOR UP
Allows you to select the next item on the menu.
8.CURSOR LEFT
Allows you to access the
9.VOLUME + / –
Increases / decreases volume.
10.MUTE
Mutes sound. To restore sound, press button again.
11.TELETEXT (applicable to certain versions only)
Selects text information. Refer to the section on “Teletext”.
Note : If your current channel is capable of transmitting teletext but is not in teletext mode, pressing the h button will activate the teletext clock at the top right hand corner of the screen.
1
2
3
4
5
6
7
8
9
10
11
7
2
AVOSD SLEEP
1 2 3
4 5 6
7 8 9
SMARTSMART
± 0 `
INC.
MENUSURR.
A H CH
SURF A/CH 4
b h f e
