Philips 240BW9-EDFU user manual Display position is incorrect Image vibrates on the screen

Troubleshooting

Display position is incorrect

Image vibrates on the screen

Vertical flicker appears

●Press the Auto button.

●Adjust the image position using the Phase/Clock of Setup in OSD Main Controls.

●Check that the signal cable is properly connected to the graphics board or PC.

●Press the Auto button.

●Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.

Horizontal flicker appears

The screen is too bright or too dark

An after-image appears

An after-image remains after the power has been turned off.

●Press the Auto button.

●Eliminate the vertical bars using the Phase/Clock of Setup in OSD Main Controls.

●Adjust the contrast and brightness on On-Screen Display. (The backlight of the LCD monitor has a fixed life span. When

the screen becomes dark or begins to flicker, please contact your sales representative).

●If an image remains on the screen for an extended period of time, it may be imprinted in the screen and leave an after- image. This usually disappears after a few hours

●This is characteristic of liquid crystal and is not caused by a malfunction or deterioration of the liquid crystal. The after- image will disappear after a period of time.

file:///E/LCD%20Monitor%20OEM/Philips/240BW9/240BW9-EDFU/lcd/manual/ENGLISH/240BW9/safety/saf_troub.htm 第 2 頁 / 共 3 [97/7/18 下午 05:05:14]