Installing the television set
Positioning the television set
Place your TV on a solid, stable surface.
To avoid any dangerous situations and operating fault, do not place anything on the TV set and leave a space of at least 5cm around the appliance.
Connections
•Insert the aerial plug into the 
socket at the rear of the set.
•Insert the mains plug into a wall socket
Remote control
Insert the two
In an effort to help protect the environment, the batteries supplied with this television do not contain mercury or nickel cadmium. Please do not discard your used batteries if you have access to a recycling facility (if in doubt, consult your dealer).
Switching on
Press the on/off key to switch on the television.
A red indicator comes on and the screen lights up.
If the television remains in standby mode, press the P 
on the remote control.
The indicator flashes when you use the remote control.
The keys on the TV set
The television set has 4 keys which are located on the front or the top of the set depending on the model.
The VOLUME - + (- 
+) keys are used to adjust sound levels.
The PROGRAM - + (- 
+) keys are used to select the required programmes.
To access the menus, simultaneously hold down the VOLUME - and VOLUME + keys.The PROGRAM - + keys may then be used to select an adjustment and the VOLUME - + keys to make that adjustment.
To exit from the menus, hold down the 2 VOLUME - and VOLUME + keys.
Note: when the LOCK function is activated, these keys are unavailable (refer to
FEATURES menu on page 7).
2
