Philips 24PW6324/01R manual Remote control keys, Screen information

The remote control keys

Screen information
To display / remove the programme
number, the name (if it exists), the
time, the sound mode and the	Picture adjustment
time remaining on the timer. Hold
	To activate / deactivate the
down for 5 seconds to
	picture adjustment controls.
permanently display the
programme number on the screen.	Standby
Sleeptimer	To set the TV to standby mode.
	To switch the TV set on again,
To select the length of time before
	press P	or	.
the set automatically switches to
standby (from 0 to 120 minutes).	NEXTVIEW:
Select EXT sockets	refer to the separate booklet
Press several times to select	(only available on certain models).
EXT1, S-VHS2, EXT2 and on
certain models EXT3 and	Numerical keys
S-VHS3.	For direct access to programmes.
Video recorder (p. 8)	For a 2 figure programme number,
	the 2nd figure must be entered
Smart sound controls	before the dash disappears.
To access a series of settings:	Smart picture controls
VOICE, MUSIC,THEATRE and	To access a series of settings:
return to PERSONAL.	RICH, NATURAL, SOFT and
	return to PERSONAL.
Menu	Incredible Surround
To display or exit from the menus.
	To activate / deactivate the
Cursor	surround sound effect. In stereo,
	this gives the impression that the
These 4 keys are used to move
	speakers are further apart. In mono,
within the menus.
	a stereo spatial effect is simulated.
Volume	Selecting TV programmes
	To move up or down a
To adjust the sound level
	programme.The number, (the
Mute	name) and the sound mode are
To disable or enable the sound.	displayed for a few seconds.
	For some programmes equipped with
	teletext, the title of the programme
Sound mode	appears at the bottom of the screen.
To switch from STEREO to
MONO or to choose between	Teletext features (p. 9)
Dual I and Dual II for
bilingual transmissions.	Previous programme
For TV sets fitted with NICAM	To access the previously viewed
reception, depending on the	programme.
transmission, you can switch
from NICAM STEREO to	16:9 formats (p. 10)

MONO or choose between

NICAM DUAL I, NICAM DUAL II and MONO.

When the sound mode is switched to MONO, the indication is displayed in blue.

3