7 Installing a System SmartCard or System Box
ANote : Ensure that the TV is turned off.
For the System SmartCard, insert the SmartCard into the SmartCard slot on the rear of the TV (available for certain models only) and connect the other cables as directed by the System provider.
After SmartCard has been inserted and the cables connected, turn on the TV.
Sample of
System
SmartCard
For the System Box, insert the RJ12 cable of the System box to the DATA 1 (RJ12) connector on the rear of the TV and connect
the other cables as directed by the System provider.
After all the connection of cables are completed, turn on the TV.
Sample of
System box
Connect to the Data 1 (RJ 12) connector at the rear of the TV.
BNote:The default setting in the Communication menu is OFF. If a System SmartCard or System Box is used with this TV, the Communication menu item must be set to the correct communications protocol. For purposes of providing an example only, this Guide will refer to SP - I2C as the communications protocol.
In the SETUP menu, select
COMMUNICATION.
Press the Cursor Right button to enter COMMUNICATION menu. Press the Cursor Right button to select SP - I2C.
Press the Cursor Down button to select ENABLE CARD SLOT.
Press the Cursor Right button to select YES in the ENABLE CARD SLOT option (if applicable).
Press the Cursor Down button to select STORE and press the Cursor Right button to store selections.
COMMUNICATION | SP - I2C |
STORE | > |
DCM TYPE | > |
POWER
RECALL
TEXT SMART SLEEP
CC
GUEST
DCM 1 | 2 | 3 |
SETUP
4 5 6
7 8 9
GUIDE
RESET 0 CH
MA/CH
_ +
+ +
