Philips 26MD350B/F7  Cable Management,  Plug In the AC Power Cord, PC Connection, Resolution

PREPARATION

[PC Connection]

This unit can be connected to your PC that has a DVI terminal.

Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor.

e.g.) rear of this unit

DVI OUT

personal computer

HDMI-DVI conversion cable

HDMI-DVI conversion cable
should be with ferrite core.	To HDMI1
	Input jack only

stereo mini plug conversion cables

The following signals can be displayed:
Format	Resolution	Refresh rate	Format	Resolution	Refresh rate
VGA	640 x 480	60Hz		1,280 x 768	60Hz
SVGA	800 x 600	60Hz	WXGA
				1,360 x 768	60Hz
XGA	1,024 x 768	60Hz

Other formats or non-standard signals will not be displayed correctly.

Note:

•Please purchase the HDMI-DVI conversion cable that has a ferrite core.

•The following operations may reduce noise.

-Attach a ferrite core to the AC power cord of your PC.

-Unplug the AC power cord and use the built-in battery of your PC.

Cable Management

Keep the cables through this holder to avoid tangling them.

rear of this unit

Plug In the AC Power Cord

Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed.

rear of this unit

AC power cord

AC outlet

Caution:

• Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V).

Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks.

Note:

• Each time you plug in the AC power cord, no operations will be performed for a few seconds.

This is not a malfunction.

16

EN