Philips 28PW6006/25 manual Remote control keys, Screen information / permanent no

Remote control keys

Screen information / permanent no.

To display / clear the program number, name (if it exists), time, audio mode and time remaining for the sleep feature. Press the key for 5 seconds to activate permanent display of the number.This key is also used to exit from the menu.

Surround Sound (only available on certain versions)

To activate / deactivate the surround sound effect. In stereo, this gives the impression that the speakers are further apart. For models equipped with Virtual Dolby Surround*, you can experience Dolby Surround Pro Logic sound effects. In mono, a stereo spatial effect is simulated.

VCR key (p.11)

Pre-set sound Used to access a series of stored settings: Speech, Music, Theatre and return to Personal.

Menu

To call up or exit the menus.

Cursor These 4 keys are used to move around the menus or provide direct access to the different 16:9 formats (p.9).

Volume

To adjust the sound level

Mute

To mute or restore the sound.

Number keys

Direct access to the programmes. For a 2 digit program, enter the 2nd digit before the dash disappears.

Selection of EXT socket

Press several times to select

EXT1, EXT2, S-VHS and AV.

Radio / TV mode

To switch the TV set to radio or TV mode (for versions equipped with radio).

Standby

Lets you place the TV set on standby.To turn on the TV, press P @ @, b, 0 to 9 (or Â).

Teletext keys (p. 8), VCR keys (p.11) and list of radio stations ı (p. 5)

Sleep

To select an automatic standby after a preset time (from 0 to 240 minutes).

16:9 modes (p. 9)

Pre-set image

Used to access a series of stored settings: Rich, Natural, Soft, Multimedia and return to Personal.

Teletext (p. 8)

Program selection

To access the next or previous programme.The number, (name) and sound mode are displayed for a few moments.

For some programs, the title of the program will be displayed at the bottom of the screen.

Teletext keys (p.8)

or VCR keys (p.11)

Sound mode

Used to force programmes in Stereo to Mono or, for bilingual programs, to choose between Dual I or Dual II. For TV sets equipped for Nicam reception, depending on the programmes, you can force the Stereo Nicam sound to Mono or select between Nicam Dual I, Nicam Dual II and Mono.

The Mono indication is red when in forced position.

*“Dolby” and the double-D symbols £ are trademarks of the Dolby Laboratories Licensing Corporation. Manufactured under license of Dolby Laboratories Licensing Corporation.

3