Philips 28PW9611/01

Direct selection of a TV channel

If you know the frequency, or the C- or S-channel number, it can be entered

directly with the digit keys on the remote control and in this way call up the

TV channel.

Ask for a list from your cable company or dealer, alternatively consult the

Table of frequencies on the inside backcover of this handbook.

4Select Search with the keys Vor W.

4Enter the 3 digits of the desired frequency or the 2 digits in case of

C-or S-channels.

4For frequencies under 100 MHz, first enter a 0. For example : 063.

5The frequency is automatically finetuned.

Have you entered a wrong number ?

First complete the frequency or the channel number with arbitrary numbers and then

start again.

Go on to 3.

Enter the programme number

Now assign a number of your choice to the TV channel you have located. In

this way you decide the order of all your TV channels.

4Select Programme Number with the keys Vor W.

4Select with the keys Cor Bor with the digit keys the desired programme

number.

Go on to 4.

Store steps 1 to 3

Now the steps 1 to 3 must be stored in the memory.

4Select Store with the keys Vor Wand press OK.

5Stored appears briefly at the bottom of the screen.

5The programme number and probably the programme name are stored in the

programme list after the message has disappeared.

If you want to store another TV channel.

4Repeat &to ‘.

If you are connected to a cable system.

4Begin immediately with é. You have already selected the TV system in &

for all channels.

If you have finished storing TV channels.

4Press MENU.

5The INSTALLATION MENU reappears.

repeat

end

123

456

789

VCR 1

VCR 2

SAT

AMP

TUNER

TAPE

DCC