Installing your television set
Positioning the television set
10 cm
10 cm | 10 cm | ||||
|
|
|
|
|
|
Place your TV on a solid, stable surface, leaving a space of at least 10 cm around the appliance.
Connections
•Insert the aerial plug into the x socket at the rear of the set.
If you are using an indoor aerial, reception may be difficult in certain conditions. You can improve reception by rotating the aerial. If the reception remains poor, you will need to use an external aerial.
•Insert the mains plug into a wall socket.
Remote control
Insert the two
The batteries supplied with this appliance do not contain mercury or nickel cadmium.
If you have access to a recycling facility, please do not discard your used batteries (if in doubt, consult your dealer).
Switching on
To switch on the set, press the on/off key. A red indicator means that the television is on standby mode. Refer to the next page on ‘Remote Control keys’ for the various keys that you could use to switch on the set. An indicator light will flash when it is receiving signal from the remote control.
The keys on the TV set
The television set has 4 keys which are located at the top.
The | keys are used to adjust the |
sound levels.The | keys are used to select |
channels. |
|
To access or exit the main menu, press down
the 
keys, simultaneously.
To select an item in the main menu, press the or key.
To select an adjustment, press down the
or 
key.
4 User | Installation |
4 | 01/24/05, 9:20 AM |
