Philips 32PFL4305/V7 Menu Introduction, Automatic Channel Set-up, Manual Channel Set-up

Menu Introduction

SOURCE: Selecting a Signal Source

PICTURE: Adjusting the Picture.

SOUND: Adjusting the Sound

FUNCTION: Function Settings.

CHANNEL: Chanel Search and Edit .

MEDIA: USB Functions.

Automatic Channel Set-up

Channel set-up involves selecting all the settings required to be able to search for and store all the channels you can receive. Make sure that the television is switched on and follow all the steps in turn specified hereafter.

Display the menu by pressing the MENU button. Press the left or right direction button to select the CHANNEL icon and press the up or down direction or OK button to display the CHANNEL menu.

CHANNEL

AUTO SCAN

SMART SCAN

MANUAL SEARCH

FINETUNE 42.25Mhz

CHANNEL EDIT

1.Press the up or down direction button to select the AUTO SCAN option.

2.Press the right direction or OK button to start channel search.

Note: Depending on the number of channels you receive, it may take several minutes for the channel search to finish. If you want to interrupt the process, press the MENU button. The channels already found

will be stored. Always start tunning from channel number 1

3.Channels are arranged in a pre-set order. Refer to the following sections if you want to fine tune or skip a

channel, or swap two channels.

During the process of SMART SCAN, the number in front of CH stands for the newly searched programmes.

If there is no new programme found, the number keeps unchanged, staying at 0.

Note: If you want to interrupt the process, press the MENU button. The channels already found will be stored.

Manual Channel Set-up

Follow the below procedure if you find that some channels have not been stored after the automatic set-up as well as the smart set-up.

MANUAL SEARCH

CH	1 CH
FRE SECT	VHFL
SEARCH	49.70 Mhz
MENU KEY TO RETURN	EXIT KEY TO EXIT

1.Activate the CHANNEL menu and press the up or down direction button to select the MANUAL SEARCH option.

2.Press the right direction or OK button to enter the MANUAL SEARCH menu.

3.Select the CH option and press the left or right direction button to select a channel number to store the channel that will be found.

4.If necessary, press the up or down direction button to select the FRE SECT option and press the left or right direction button to toggle among VHFH, UHF and VHFL.

5.Press the up or down direction button to select the SEARCH option and press the left or right direction button to search manually.

6.Press MENU to return or EXIT to close the menu.

Fine Tuning a Channel

If the picture is not clear you can fine tune the channel.

1.Activate the CHANNEL menu and press the up or down direction button to select the FINETUNE option.

2.Press the left or right direction button to fine tuning

Smart Channel Set-up

3. Press MENU to return or EXIT to close the menu.

This operation will keep all the existed channels and add newly found channels to the end of the channel list.

1.Activate the CHANNEL menu and press the up or down direction button to select the SMART SCAN option.

2.Press the right direction or OK button to start smart scan.

EN 9