41
ENGLISH
Connections
7.4.3 Naming your devices
Name the connected devices for easy selection and
best signal handling.
Assign the type of device (DVD,VCR, Game ...) to
the connector you use for that device.
‡Press Menu on the remote control and select
TV menu > Installation > Connections > EXT1.
®Press navigation key right to enter the list.
ÒPress navigation key up or down to select the
type of device.
†Press Menu to quit the menu.
7.4.4 Decoder channels
Decoders that decode an antenna channel are
connected to EXT1 or EXT2 (scart).
You have to assign the TV channel as a channel to
be decoded.Then assign the connection where the
decoder is connected.
‡Press Menu on the remote control and select
TV menu > Installation > Decoder > Channel.
®Press navigation key right to enter the list.
ÒPress navigation key up or down to select the
channel to decode.
†Press navigation key left and go back to select
Status.
ºPress navigation key up or down to select the
connector used by the decoder.
◊Press Menu to quit the menu.
7.5 Preparing for digitalservices
Scrambled digital TV channels can be decoded with
a Conditional Access Module (CAM) and a Smart
card provided by a digital TV service operator.The
CAM may enable several services depending on the
operator you choose (e.g. Pay TV).
Contact your digital TV service operator for more
information and terms.
7.5.1 Insert a Conditional Access Module -
CAM
)Warning
Switch off your TV before inserting a CAM.
Look on the CAM for the correct inserting
direction. Inserting the module incorrectly may
damage the CAM and your TV.
‡Gently insert the CAM into the Common
Interface slot at the back of your TV as far as it
will go.
®Leave the CAM in the Common Interface slot
permanently.
It may take a few minutes before a CAM is
activated. Removing the CAM will deactivate the
digital TV ser vice.
7.5.2 Common interface menu
From this menu you access the CAM service you
have installed.The applications and their function,
the content and the messages on screen come
from the CAM service provider.
‡Press Menu on the remote control and select
TV menu > Features > Common interface.
This menu option is available when a CAM is
inserted and has made contact with the provider.
COMMON INTERFACECOMMON INTERFACE
C
onnections
EXT1
N
o
n
e
DVD
Blu-ra
y
HDD
/
DVD
R
HD r
G
am
e
V
CR
...
EXT1
EXT2
EXT
3
HDMI1
HDMI2
HDMI
3
Sid
e
...
2690.1 en 18-09-2007 16:50 Pagina 41