English
34
Timer Recording

Timer recording (VIDEO

PLUS+® System)

This is a simple timer programming
system. To use it, enter the PlusCode
programming number associated with
your television programme. You can  nd
this number in your TV listings magazine.
All the information required by this
recorder for programming is contained in
the programming number.
A Switch on the TV to the correct viewing
channel for the recorder (e.g. ‘EXT’, ‘0’,
‘AV’).
B Press VIDEO Plus+ on the remote
control.
The VIDEO Plus+® System menu
appears.
VIDEO Plus+ System
OK
CANCELCONFIRM
Enter the PlusCode programming
number for the show wish to record.
C Use the numeric keypad 0-9 to enter
the PlusCode programming number for
the show you wish to record.
(e.g. : 5-312-4 or 5,312 4, key in ‘53124’).
To clear the PlusCode programming
number, press CLEAR on the remote
control.
To cancel the PlusCode programming,
use ST keys to select CANCEL in the
menu and press OK.

About timer recording

Use the timer recording to automatically
start and stop a recording at a later
date/time. The recorder will tune to the
right programme channel and begin
recording at the speci ed time.
With this recorder, you can schedule up
to 8 recordings at a time. During timer
recording, changing the channel that is
being recorded is not possible.
There are two ways to programme
a timer recording
– Using the VIDEO Plus+® system.
– Using manual timer schedule.
SOURCE
SELECT
TOOLS
DISC MENU
USB TV/DVD
CLEAR REPEAT
ç
PLAY
REC MODE
REC MODE
TIMER
TIMER
EDIT
EDIT
VIDEO Plus+
VIDEO Plus+

TIMER

About ‘VPS/PDC’
‘VPS’ (Video Programming System) or
‘PDC’ (Programme Delivery Control) is
used to control the start and duration of
TV channel recordings. If a TV
programme starts earlier or ends later
than was scheduled, the recorder will
then turn on and off at the correct time.
VPS/PDC is intended to record the entire
programme. To set a timer that is longer/
shorter than the VPS/PDC broadcast
time, you must turn off the VPS/PDC.
TIPS: Ensure that there is enough space on the recordable DVD before recording. Before you playback the
DVD±R on another player,  nalise the disc. See “Playing your recordings (DVD±R) on other DVD players”.